Existen artículos en su cotización.

Precios totales :

Continuar comprando Ir a detalles de cotización

IMAGEN DE REFERENCIA

ADS-SE1 Sensor lateral para puerta tipo barrera alimentacion 12-24VCA/VCC salida a relevador NA

Referencia ADS-SE1

Sensor lateral para puerta tipo barrera, alimentacion 12-24VCA/VCC; salida a relevador NA max. 50VCC 0.3A, carga resistiva, distancia de sensado de 0 a 10m; tiempo de respuesta de aprox. 50ms (con luz apagada) y grado de proteccion IP30

¿Necesitas certificado de calibración?, ¡pregunta a tu vendedor favorito vía WhatsApp!

ADS-SE1 Sensor

Cotizar

Descripción
Reseñas (0)


Sensing type	Through-beam type
Sensing distance	0 to 10m
Light source	Infrared LED(850nm modulated)
Power supply	12-24VAC~ ±10% 50/60Hz 12-24VDC
Current consumption and Power consumption	Current Consumption: Max. 2VA, Power Consumption: Max. 50mA
Control output	Relay(SPST(1a))
Sensing Channel	1-channel
Sensitivity adjustment	Set by button
Sensor cable length	5m
Environment_Ambient illumination	Sunlight: Max. 100,000lx(receiver illumination)
Environment_Ambient temperature	-20 to 55℃, storage: -25 to 60℃
Protection structure	IP30
Environment_Ambient humidity	35 to 85% RH, storage: 35 to 85% RH
Response time	Approx. 50ms(from light OFF)
Output holding time	Approx. 500ms(from light ON)
Available sensor set	1-channel
Sensor cable	Ø2.4mm, 1-wire, 5m(AWG26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1.32mm)
Material	Sensor - Holder: Acrylonitrile butadiene styrene, Lens: Polymethyl methacrylate, Lens guide: Polycarbonate, Nut: Polycarbonate Controller - Housing: Acrylonitrile butadiene styrene, Cover: Acrylonitrile butadiene styrene, Bolt: Steel chromium molybden
Accessories	Sensor 1set(ADS-SHP), Fixing bolt(M4×20) for controller: 2
Weight	Approx. 450g(approx. 300g)