GENERAL DATA:

Construction modular, compact with filtering element in HDPE

Materials see TABLE OF MATERIALS on the following page

Ports with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with diameters of 6, 8 and 10 mm

Condensate capacity 24 cm³

Mounting in-line; wall-mounting by means of through holes in the body or with a support bracket; panel mounting

Operating temperature -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature)

Condensate drain semi-automatic manual, automatic, protected depressurisation, direct G1/8 exhaust

Quality of delivered air according to ISO 8573-1 2010 Class 6.8.4 with 5 µm filtering element Class 7.8.4 with 25 µm filtering element

Inlet pressure 0.3 ÷ 16 bar ( with automatic drain 1 ÷ 9 bar )

Exit pressure 0.5 ÷ 2bar 0.5 ÷ 4bar 0.5 ÷ 7bar 0.5 ÷ 10bar

Nominal flow see FLOW DIAGRAMS on the following pages